F-4 Phantom II air intake ducts for MENG kit (3D Printed) (1/48)

RESKIT - Accessories for Scale Plastic Kits

  • Price:$19.90

Product Code: RSU48-0478
  • Brand: RESKIT
  • Availability: In Stock

Main: New Releases
Category: Resin & 3D accessories
Type of equipment: Aircraft
Scale: 1/48
Type of product: Air Intakes
Recommended kit: Meng

Kit-supplied intake trunks on the Meng 1/48 F-4 Phantom II are almost always too shallow, leaving an obvious see-through gap to the back of the intake opening. This set replaces them with properly deep, correctly curved ducting that carries the eye naturally back toward the compressor face. The added depth removes the hollow, unfinished look that shallow kit intakes give when viewed from the front or from below the model. Duct walls are kept thin and consistent, avoiding the thick, toy-like cross-section typical of injection-molded replacement parts. Parts are engineered to key directly into the Meng kit's intake openings and forward fuselage structure, so no trimming of the surrounding plastic is required. A dark interior base coat, graduated up through grays toward the compressor face, gives real convincing depth once installed. Because the ducting is a single clean piece, there are no unsightly seam lines running down the middle of the intake as there often are with kit parts split for the mold. This is one of the easiest ways to fix a weak point that's otherwise highly visible on a nose-on or three-quarter front view of the finished model. Installation is straightforward glue-in work, with the joint line falling naturally along the existing intake lip. For anyone photographing the finished model from the front, this single part upgrade makes a disproportionate difference to the overall impression. It pairs well with other nose-area upgrades for the F-4 Phantom II, such as a detailed cockpit or refined intake lip, for a fully finished front end. Overall it's a quick, contained fix for one of the more commonly overlooked weak spots on kits of this type.

New Releases

Shop B-24 Liberator propellers (2 types), engines & cowlings (closed engine bays (2 pcs) and open engine bays 2 (pcs)) for HobbyBoss kit (3D Printed) (1/48) Scale Plastic Models Kits. Accessories and Resin Parts. Reskit online Store
Add to my
assemblies

Engines

Product Code: RSU48-0561

Create a stunning maintenance diorama with your 1/48 HobbyBoss B-24 Liberator. This set includes fou..

Availability: In stock
$65.40
Shop CH-54B, S-64F Skycrane, landing gear with weighted wheels for ICM kit (Metal & 3D Printed) (1/35) Scale Plastic Models Kits. Accessories and Resin Parts. Reskit online Store
Add to my
assemblies

Wheel bays & landing gear,wheels

Product Code: RSU35-0105

Give your massive 1/35 ICM Skycrane a rock-solid stance with this premium landing gear set. Combinin..

Availability: In stock
$57.90
Shop F-14 Tomcat pilots (in a standing position - scene 2) (2 pcs) (3D Printed) (1/48) Scale Plastic Models Kits. Accessories and Resin Parts. Reskit online Store
Add to my
assemblies

Figurines

Product Code: RSF48-0114

Set of two 1/48 scale 3D printed F-14 Tomcat pilots in standing poses, capturing a second distinct s..

Availability: In stock
$18.50
Shop F-16 Fighting Falcon (F100-PW-229) open exhaust nozzle for Revell kit (3D Printed) (1/72) Scale Plastic Models Kits. Accessories and Resin Parts. Reskit online Store
Add to my
assemblies

Exhaust nozzles

Product Code: RSU72-0351

Upgrade your 1/72 Revell late-block F-16 with this highly accurate F100-PW-229 open exhaust nozzle. ..

Availability: In stock
$13.60
Shop F-16 single-seat version Pre-cut painting masks for Hasegawa kit (1/72) Scale Plastic Models Kits. Accessories and Resin Parts. Reskit online Store
Add to my
assemblies

Painting Masks

Product Code: RSM72-0018

Speed up your 1/72 Hasegawa F-16A/C build with these pre-cut painting masks. Perfectly tailored for ..

Availability: In stock
$5.00
Shop F-16C (Fighting Vipers) (Block 30,40,42,50,52) with mission marking (Main Decals with Stencils) (1/48) Scale Plastic Models Kits. Accessories and Resin Parts. Reskit online Store
Add to my
assemblies

Decals

Product Code: RSB48-0014

A comprehensive 1/48 decal sheet for modern USAF F-16C Vipers. Includes detailed stencils, national ..

Availability: In stock
$16.50
Shop F-16I Sufa cockpit (Detailed edition) for Kinetic Gold kit (3D Printed) (1/48) Scale Plastic Models Kits. Accessories and Resin Parts. Reskit online Store
Add to my
assemblies

Cockpit & Cargo bay

Product Code: RSU48-0663

The ultimate 3D-printed cockpit for the 1/48 Kinetic Gold F-16I Sufa. Every switch, screen, and seat..

Availability: In stock
$58.80
Shop F-35B Lightning II opened canopy frame for Trumpeter kit (3D Printed) (1/32) Scale Plastic Models Kits. Accessories and Resin Parts. Reskit online Store
Add to my
assemblies

Canopy frame

Product Code: RSU32-0267

Showcase your detailed 1/32 F-35B cockpit with this highly accurate open canopy frame designed for t..

Availability: In stock
$17.20
Shop F-35B Lightning II Pre-cut painting masks for Tamiya kit (1/48) Scale Plastic Models Kits. Accessories and Resin Parts. Reskit online Store
Add to my
assemblies

Painting Masks

Product Code: RSM48-0026

Achieve perfect canopy frames and wheel hub demarcations on your 1/48 Tamiya F-35B Lightning II. The..

Availability: In stock
$8.30
Shop F-4B Phantom II Cockpit (Detailed edition) for Tamiya kit (3D Printed) (1/48) Scale Plastic Models Kits. Accessories and Resin Parts. Reskit online Store
Add to my
assemblies

Cockpit & Cargo bay

Product Code: RSU48-0624

The ultimate 3D-printed cockpit for the spectacular 1/48 Tamiya F-4B Phantom II. Every switch, dial,..

Availability: In stock
$58.80
Shop MH-60L (GAU-17A (M134 Minigun)) weapon set (2 pcs) for ICM kit (3D Printed) (1/48) Scale Plastic Models Kits. Accessories and Resin Parts. Reskit online Store
Add to my
assemblies

Arms and weapons, Guns

Product Code: RSU48-0608

Arm your 1/48 ICM MH-60L Black Hawk with this pair of highly detailed GAU-17A (M134 Minigun) door gu..

Availability: In stock
$26.90
Shop MH-60S folded main rotor with blade fold restraint systems for Academy kit (3D Printed) (1/35) Scale Plastic Models Kits. Accessories and Resin Parts. Reskit online Store
Add to my
assemblies

Helicopter rotor

Product Code: RSU35-0095

Replicate the compact storage configuration of the MH-60S Knighthawk with this fully folded main rot..

Availability: In stock
$57.60
Shop MH-60S unfolded main rotor for Academy kit (3D Printed) (1/35) Scale Plastic Models Kits. Accessories and Resin Parts. Reskit online Store
Add to my
assemblies

Helicopter rotor

Product Code: RSU35-0096

Upgrade the flight-ready stance of your 1/35 Academy MH-60S Knighthawk with this highly detailed, un..

Availability: In stock
$52.60
Shop P-47N Thunderbolt propeller, engine (P&W R-2800) & engine hood for Trumpeter kit (3D Printed) (1/32) Scale Plastic Models Kits. Accessories and Resin Parts. Reskit online Store
Add to my
assemblies

Engines

Product Code: RSU32-0265

Transform your 1/32 Trumpeter Thunderbolt into the ultimate long-range P-47N. This set features the ..

Availability: In stock
$69.00
Shop Rafale B/C wheel bays, landing gear with weighted wheels for Revell/Academy kit (3D Printed) (1/48) Scale Plastic Models Kits. Accessories and Resin Parts. Reskit online Store
Add to my
assemblies

Wheel bays & landing gear,wheels

Product Code: RSU48-0635

Completely overhaul the undercarriage of your 1/48 Revell or Academy Rafale B/C. This massive 3D-pri..

Availability: In stock
$65.90
Shop Red jerseys (2 pcs), AERO 21A (MHU-191A/M) with AIM-54C Phoenix for F-14B/D (scene 1) (US Navy Carrier Deck Crew) (3D Printed) (1/72) Scale Plastic Models Kits. Accessories and Resin Parts. Reskit online Store
Add to my
assemblies

Figurines, Arms and weapons

Product Code: RSF72-0096

Recreate the arming of the legendary Tomcat with this 1/72 flight deck scene. Features two Red Shirt..

Availability: In stock
$23.90
Shop UH-60M/L/P, MH-60G, AH-60L DAP unfolded main rotor for Academy kit (3D Printed) (1/35) Scale Plastic Models Kits. Accessories and Resin Parts. Reskit online Store
Add to my
assemblies

Helicopter rotor

Product Code: RSU35-0097

Enhance your 1/35 Academy Black Hawk or Pave Hawk with this stunningly detailed unfolded main rotor...

Availability: In stock
$52.60
Shop ​F-35B Lightning II cockpit (Detailed edition) for Tamiya kit (3D Printed) (1/48) Scale Plastic Models Kits. Accessories and Resin Parts. Reskit online Store
Add to my
assemblies

Cockpit & Cargo bay

Product Code: RSU48-0227

Build the ultimate fifth-generation workspace with this hyper-detailed F-35B cockpit set for the Tam..

Availability: In stock
$39.20
Shop A-10A Thunderbolt -  interior 3D decals for GWH kit (1/72) Scale Plastic Models Kits. Accessories and Resin Parts. Reskit online Store
Add to my
assemblies

3D Decals

Product Code: K72266

Super-detail the cockpit of your 1/72 Great Wall Hobby A-10A Warthog. This 3D decal set features rai..

Availability: In stock
$11.00
Shop MiG-23 MLD - interior 3D decals for Trumpeter kit (1/32) Scale Plastic Models Kits. Accessories and Resin Parts. Reskit online Store
Add to my
assemblies

3D Decals

Product Code: K32069

Upgrade the massive 1/32 Trumpeter MiG-23 MLD "Flogger-K" with this highly accurate 3D cockpit decal..

Availability: In stock
$23.40